The Hidden Admin Cost of Winning Work

Before you lift a tool, every job has already cost you hours of calls, visits, quotes and chasing. Most contractors never count them. Counting them changes the maths.

The cost nobody invoices

Every job you win has cost you hours before the work starts. Count them, and the real price of winning work looks very different.

When contractors work out what a job cost them to win, they usually count the lead fee or the advertising spend. Very few count the time: the phone calls returned in the van, the site visits to customers who were only browsing, the quote written at ten at night, the follow-up messages, the deposit request, the invoice, the reminder when the balance is late.

That time is real, it is unpaid, and it applies to every job you quote for, not just the ones you win. For a small firm, it is often the biggest single cost of getting work, and it is almost invisible because it never appears on a bank statement.

This guide sets out where the time goes, how to measure it in your own business, and the realistic options for reducing it. It sits within our wider guide to getting more work as a contractor.

Where the time goes

The six stages of admin behind every job

Each stage takes time on every enquiry, including the ones that never become work.

Answering the enquiry

Taking the call or reading the message, often mid-job, then calling back later. Working out what the customer wants, whether it is your kind of work and whether it is worth a visit.

Booking the visit

Agreeing a time that suits the customer and your diary, confirming it, rearranging it when something changes, and travelling there and back.

Writing the quote

Pricing the job, writing it up, checking the figures and sending it. On a larger job, chasing suppliers for prices before you can even start.

Chasing the decision

Following up the quote, answering questions, adjusting the scope, and following up again. Or, more often, not getting round to it and losing the job quietly.

Collecting the money

Requesting the deposit, raising invoices, recording payments, and chasing the balance when it is late. Every late payment adds time and a cash-flow cost.

Keeping the customer informed

Calls and messages during the job about start dates, progress, changes and delays, usually arriving while you are on a roof and can't answer.

Why it stays hidden

Why admin time never shows up on the books

Admin hides because it happens in fragments. Ten minutes on the phone at lunchtime, half an hour on a quote in the evening, a few messages from the van. No single piece feels like much. Added up over a month, it is often days of work.

It also hides because most of it falls on quotes that don't convert. If you quote for several jobs to win one, every hour spent on the unsuccessful quotes belongs to the job you won. The admin cost of a job is not the time you spent on that customer; it is the time you spent on every customer it took to get there.

And it hides because it is usually done by the owner, or by a partner at home, without anyone putting a value on it. That makes it feel free. It isn't. Every hour spent on admin is an hour not spent on paid work, on rest, or on the people you do it all for.

There is a quieter cost as well. Admin done in the evenings and at weekends is time taken from rest, and a tired contractor prices less carefully, misses messages and is slower to follow up. The admin load doesn't just cost hours; it wears down the quality of the work that wins the next job.

The lead fee is only part of the picture. The true cost per job won explains how to combine the money and the time into one honest figure.

Measuring it

How to work out your own admin cost

No industry average will tell you this. Your own numbers will, and they take a fortnight to gather.

  1. Log your admin time for two weeks

    Every call, message, visit, quote and invoice, with the time it took. Use a notebook or your phone. Include the evenings and the travel to surveys.

  2. Count what came out of it

    How many enquiries came in, how many visits you made, how many quotes you sent and how many jobs you won in the same period.

  3. Put a value on your time

    Use your own day rate or what you could have earned on the tools. If someone else does the admin, use what they cost, or what they would cost if you paid them.

  4. Add your marketing spend

    Lead fees, subscriptions, advertising and website costs for the same period, so the time and the money sit side by side.

  5. Divide by jobs won

    Time value plus marketing spend, divided by the number of jobs won, is what each job really cost you to get. Most contractors are surprised by the answer.

Adding it to the lead fee

What the admin does to the cost of paid leads

Published UK pricing puts Bark at around £6–£30 per connection, MyBuilder and Rated People at around £15–£60 per lead, and Checkatrade at around £600–£1,200 a year. Once conversion is accounted for, the true cost per job won on paid platforms is commonly put at roughly £150–£1,000. How much construction leads cost breaks those figures down.

Those figures cover only the money. Every one of those leads also carries the admin set out above: the call, the visit, the quote and the chasing, whether the job is won or not. Where the same enquiry has gone to several trades, the admin on the jobs you don't win rises with it, because you are doing the full routine on enquiries that were always going to be split several ways.

Put the admin time on top of the lead fee and the true cost of a job won through paid leads is higher than the platform figure suggests, sometimes much higher. That is why two contractors paying the same lead fees can reach very different conclusions about whether the platforms are worth it. Why are my leads so expensive? looks at the other factors.

Platform pricing as published by Trades Grow, One Base Media, Sleepless Tradesman and SwiftLead, 2026. Rates change, so check current pricing before relying on these figures.

Late payment is admin with interest

Chasing money is the most expensive admin of all, because it costs time and cash flow together. Clear payment terms in the quote, a deposit before work starts and an invoice sent on the day you finish cut the chasing considerably. If a balance is late, a polite, prompt reminder works better than waiting and hoping.

The options

Ways to cut the admin, and what each one costs you

There is no free option. Each one trades money, time or control for something else.

Doing it better yourself

  • Qualify every enquiry by phone before visiting
  • Use survey checklists and quote templates
  • Send quotes by email with clear terms
  • Book follow-ups in the diary
  • Use job management software for invoices and reminders
  • Still your time, but less of it

Handing it to someone else

  • A part-time administrator in the office
  • A virtual assistant taking calls and emails
  • A bookkeeper for invoices and payments
  • An answering service for missed calls
  • A contractor network that runs the whole process
  • Costs money or margin, frees your time

Choosing

Which option makes sense for your business

Tighter routines and simple software suit almost every firm, and they are the place to start. They cost little and they cut the admin on every job. A proper quoting routine alone takes a lot of the evening work out; how to quote faster and win more sets one out. The limit is that you are still the one doing it, just faster.

It is also worth being choosier about which enquiries you take on at all. An enquiry you decline costs a phone call; one you pursue to a lost quote costs a visit, an evening and a follow-up. If a source of work regularly produces customers who were only collecting prices, the admin on those enquiries may cost more than the lead fee. When is a lead worth paying for? covers how to judge it.

Hiring help makes sense when there is enough steady work to keep someone busy and you can afford the cost through the quiet months as well as the busy ones. A part-time administrator or virtual assistant can take calls, book visits and chase payments, but they still need managing, and they rely on you for the pricing. When should a contractor hire admin help? covers the signs that it is time.

A contractor network removes most of the admin rather than reducing it, because the network takes on the enquiry, the booking, the quotation, the follow-up and the payment administration. The trade-off is a different commercial arrangement: you price at trade rate and the network's fee is added on top in the customer's quotation. It suits some contractors very well and others not at all, depending on how much they value owning the customer relationship.

A calm, well-lit room beneath a large glazed roof.

Where Mortaro fits

What changes when the admin isn't yours

In the Mortaro network, the admin stages above sit with us. We generate the enquiry, qualify the customer, book the site visit, prepare and issue the quotation from your trade-rate price, follow it up, organise the start date and keep the customer informed while you are working. You attend the visit, price the job and carry out the work. What Mortaro handles for contractors sets out the split in full.

The payment side changes too. The customer pays a deposit and a balance, which we collect as payment administration agent and pass to you without unnecessary delay. There is no chasing for you to do. How and when you get paid explains the detail.

There is no membership, subscription or per-lead charge. We won't promise volume, because work depends on your area, your trade and your track record. But the hours you currently spend winning work are the hours a network gives back. The contractor network hub explains the arrangement as a whole, including who it suits and who it doesn't.

Straight answers

Questions about admin time

Is there a typical admin cost per job?

Not one worth quoting. It varies with your trade, the size of your jobs, where your enquiries come from and how many quotes you send per job won. Measuring your own for two weeks will tell you far more than any average.

Should I count time spent on quotes I don't win?

Yes. That time was spent getting work, so it belongs to the jobs you did win. Leaving it out makes every job look cheaper to win than it really was.

Is admin software worth it?

Often, for invoicing, reminders and scheduling. It speeds up the admin you do but doesn't remove it. Pick something simple and actually use it.

Can I hand over all my admin?

To a point. An administrator can take on calls, bookings and invoicing, but still needs you for pricing and technical questions. A network can take on most of the commercial process, but under a different arrangement from winning work directly.

For contractors

Tell us about your business

Your trade, the areas you cover and the size of work you take on. A person reads every enquiry, and if it looks like a fit we will send you the full application.